F2K Kit

Mac · 07-04-2010, 01:08 PM

If your uncle gave you a S2000 motor and you pops sponsors you a K-series Transmission/tranny/gearbox i guess with the money you saved you can get this F2k Kit valued at $3995.00us

http://www.inlinepro.com/s1/p-74-f2k-kit.aspx

Honda developed one of the highest horsepower per liter in the F20/F22c. However, this engine is only offered in the Honda S2000.

We have developed a kit allowing you to mount a F20/F22c engine in your 92-95 Civic or 94-00 Integra. The motor plate was CAD designed and CNC cut from billet aluminum. Competition Clutch designed a custom flywheel and clutch kit, and Drive Shaft Shop designed the custom axles to allow the power to transfer to the wheels.

Parts Included:
InlinePRO Motor Plate
InlinePRO Half Shaft Adapter
InlinePRO Custom Mounts
Competition Clutch custom Flywheel and Clutch Kit (single plate)
Drive Shaft Shop Level 2.9 Axles

SLICK jr · 07-05-2010, 09:34 AM

as good as this sounds i think this is only worth it if your bolting on a B serise tranny

Dwight · 07-05-2010, 11:39 AM

sounds good abit expensive imo but the F20 engine is a powerhouse an with a tranny that can withstand some serious harassing it should work well

07-04-2010, 01:08 PM	#1
Mac Just Another Member Join Date: Sep 2007 Location: Coolidge Posts: 2,164 Thanks: 29 Thanked 17 Times in 16 Posts	F2K Kit If your uncle gave you a S2000 motor and you pops sponsors you a K-series Transmission/tranny/gearbox i guess with the money you saved you can get this F2k Kit valued at $3995.00us http://www.inlinepro.com/s1/p-74-f2k-kit.aspx Honda developed one of the highest horsepower per liter in the F20/F22c. However, this engine is only offered in the Honda S2000. We have developed a kit allowing you to mount a F20/F22c engine in your 92-95 Civic or 94-00 Integra. The motor plate was CAD designed and CNC cut from billet aluminum. Competition Clutch designed a custom flywheel and clutch kit, and Drive Shaft Shop designed the custom axles to allow the power to transfer to the wheels. Parts Included: InlinePRO Motor Plate InlinePRO Half Shaft Adapter InlinePRO Custom Mounts Competition Clutch custom Flywheel and Clutch Kit (single plate) Drive Shaft Shop Level 2.9 Axles __________________ [IMG][/IMG] Hold On Not Done Accelerating

07-05-2010, 09:34 AM	#2
SLICK jr Senior Member Join Date: Dec 2007 Posts: 1,264 Thanks: 1 Thanked 13 Times in 8 Posts	as good as this sounds i think this is only worth it if your bolting on a B serise tranny __________________ (underestimation was your first mistake)

07-05-2010, 11:39 AM	#3
Dwight Senior Member Join Date: Aug 2007 Location: Hondaville Posts: 3,761 Thanks: 0 Thanked 6 Times in 6 Posts	sounds good abit expensive imo but the F20 engine is a powerhouse an with a tranny that can withstand some serious harassing it should work well __________________ Honda for life .............................................. "difficult takes a day...impossible takes a week"

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode