Drag Evo Thread

guss76 · 04-03-2008, 05:49 PM

guss76 · 04-03-2008, 05:54 PM

ETS GT45R turbo drag car

1081whp so far
http://s92.photobucket.com/albums/l8...nt=1081whp.flv

1) Stock Crank
2) Groden Aluminum Rods
3) JE 10.1 Pistons
4) Stock Block Stock Bore size. we felt we needed the extra wall thickness
5) Cooper O-ring on the block with stock head gasket and no receiver grove on the head
6) AMS Head Studs tq to 100ft lbs
7) Stock oil pump
8) GSC CNC Head plus 1 valves,Kiggley Single springs,GSC S3 Cams, and some other good stuff
9) Amsoil 20-50wt oil
10) Modified Oils pick and pan
11) AMS Drag Intake Manifold with Q45
12) ETS 45r Turbo Kit made to work with stock radiator
13) PWR Radiator
14) AEM Cam gears set to zero ( haven't messed with them yet)
15) ETS 3" uicp and licp with Tial 50mm Blow-off Valve
16) ETS Water to Air Intercooler
17) SparkTEch Ignition System with M&W ProDrag4 box and 300m coils
18) Fluidamper
19) AEM EMS
20) All new wiring in the car Painless Wiring Systems
21) AMS Lower light weight cross member
22) 1600cc RC injectors
23) Aeromotive Pro series fuel pump good for 120psi
24) Aeromotive regulator
25) 4 gallon Fuel cell
26) Tial Lightweight Exhaust Housing 1.00
27) 4202 compressor housing machined for the 45r wheel
28) ETS 4" Exhaust

damussi · 04-03-2008, 06:06 PM

Quote:

Originally Posted by guss76

tell me if he nah go feel hot in dey lol

guss76 · 04-03-2008, 06:08 PM

APC'S DRAG EVO SUPER MOD

APC Racing Evo II
http://www.youtube.com/watch?v=I_YO2...eature=related
http://www.youtube.com/watch?v=OXIuJ...eature=related

Class: Super Mod
Best Et: 8.76
Best Mph: 173.68
Horsepower @ Wheels: 915.4

PPG 4speed drag gearbox (special for APC)
Custom clutch system
Billet center diff
Custom made transfer case
Chrome molly yoke & driveshaft with 9" uni's
Billet front axles with large spline CV's
Custom front half shaft with heavy duty bearing
Five stud custom front hubs with large wheel bearing
Modified factory front callipers with Endless pads
Coil over front suspension with adjustable bearing plates
Manual steering conversion
Super-pro bushes
4 link rear end with A-arm and adjustable sway bar
Strange double adjustable coil over shocks with Eibach springs
Custom Hilux diff with Evo brake conversion
Specially built diff center with custom ratio's
Line lock kit
Weld pro-star wheels 15 x 8 with 26" slicks (set of 4)
Weld pro-star 15 x 10 with 26" slicks for rear (pair)

Motec M880 with logging, Lambda & functions
Motec CDI 4
Bosch coil x 4
AIM race backlit dash
Motec shift light
Wiring harness
Driveshaft speed sensor
High quality sensor fitted throughout
Motorsport systems strain gauge for clutch shifting
8 x Bosch motor sport injectors
Twin fuel rails
Odyssey battery
Kinsler fuel regulator & mechanical pump
2 x Magnafuel filters
ARE custom fuel cell
Braided hose and speed flow throughout
1 x ARE oil catch tank and 1 x rear oil catch tank
Custom ARE radiator and header tank
ARE liquid intercooler system
APC custom inlet manifold
CES exhaust manifold
HKS 60mm wastegate
Garrett GT custom spec turbo
CES turbo & wastegate discharge pipe
APC custom engine 915HP @ all wheels

Full bodied car with lightweight lift off front end
Chrome molly roll full cage
Rear aerofoil adjustable wing
Lexan windows
Window net
Under body tray
Tin-work with 4 link access, wheel tubs
Deist chute and harness
Race seat and cover
Custom sheet alloy dash

Michael · 04-03-2008, 06:08 PM

Quote:

Originally Posted by damussi

tell me if he nah go feel hot in dey lol

Me ah tell you

guss76 · 04-03-2008, 06:16 PM

Buschur Evo 8 RS Drag Car

he EVO is equipped with the following:

BR Stage 3 2.0 Shortblock
BR Stage 3 Cylinder Head
Bushwacker Transmission
BR minibattery kit
BR coil on plug ignition
BR Race FMIC (w/ 3" inlet and outlets)
BR custom fuel cell
BR Fuel pressure regulator kit
(4) RC 1600cc injectors
Buschur Racing fuel rail
Apexi N1 Coil-over suspension
Robi Spec alignment
Hoosier Slicks
BR 3.5" custom side exit exhaust
Kansai intake manifold
STOCK front axles, STOCK rear end, STOCK driveshaft, STOCK transfer case
Exedy Triple Disc Clutch
Driveshaft Shop Stage 5 axles (original design)
Weldon Fuel Pump
BR BF272 Camshafts
BR Small Radiator Kit
BR -12 upper and lower radiator hoses
BR Custom Built Header
GT42R Turbo
AEM EMS, w/5 bar map sensor, integral Uego, Air temp sensor
Reese Chassis rollcage & chassis work
BR Built, Percy Lexan Windows
BR Custom Upper and Lower 3" Intercooler Pipes
BR Poly Front and Rear Engine Mounts
AMS Wilwood Front Brake Kit

guss76 · 04-03-2008, 06:44 PM

1062 WHP
2.0 L Buschur Race Short Block wioth alum rods 9 / 1 compression ratio
Buschur Stage II head
Gt42 R Shrerer manifold
Kansai intake manifold
Buschur 3.5" exhuast
Buschur race fmic
Buschur fmix pipes
Buschur cop ignition
Buschur mini battery kit
Buschur strut bar
Buischur MBC
Buschur rear mustache bar
Shep Trans
Drvieshaft shop rear axels
AEM EMS
1650 injectors
Weldon fuel pump

Best 1/4 Mile pass - 9.50 @ 148
Fastest 1/4 mile 156.9

cyackle · 04-03-2008, 06:58 PM

me nah understand guss i waiting on the AMS evo lol

guss76 · 04-03-2008, 07:01 PM

Quote:

Originally Posted by jason

me nah understand guss i waiting on the AMS evo lol

LOL searching for some good pics for the last 30mins tyhe ones on there site suck

cyackle · 04-03-2008, 07:03 PM

Quote:

Originally Posted by guss76

LOL searching for some good pics for the last 30mins tyhe ones on there site suck

hahhahah lolol i knew you would be looking for them lol

04-03-2008, 05:49 PM	#1 (permalink)
guss76 Moderator - Smoking Aces - Member Join Date: Jul 2007 Location: Cassada Gardens Posts: 2,277 Thanks: 0 Thanked 0 Times in 0 Posts	Drag Evo Thread Last edited by guss76; 04-03-2008 at 05:59 PM.

04-03-2008, 05:54 PM	#2 (permalink)
guss76 Moderator - Smoking Aces - Member Join Date: Jul 2007 Location: Cassada Gardens Posts: 2,277 Thanks: 0 Thanked 0 Times in 0 Posts	ETS GT45R turbo drag car 1081whp so far http://s92.photobucket.com/albums/l8...nt=1081whp.flv 1) Stock Crank 2) Groden Aluminum Rods 3) JE 10.1 Pistons 4) Stock Block Stock Bore size. we felt we needed the extra wall thickness 5) Cooper O-ring on the block with stock head gasket and no receiver grove on the head 6) AMS Head Studs tq to 100ft lbs 7) Stock oil pump 8) GSC CNC Head plus 1 valves,Kiggley Single springs,GSC S3 Cams, and some other good stuff 9) Amsoil 20-50wt oil 10) Modified Oils pick and pan 11) AMS Drag Intake Manifold with Q45 12) ETS 45r Turbo Kit made to work with stock radiator 13) PWR Radiator 14) AEM Cam gears set to zero ( haven't messed with them yet) 15) ETS 3" uicp and licp with Tial 50mm Blow-off Valve 16) ETS Water to Air Intercooler 17) SparkTEch Ignition System with M&W ProDrag4 box and 300m coils 18) Fluidamper 19) AEM EMS 20) All new wiring in the car Painless Wiring Systems 21) AMS Lower light weight cross member 22) 1600cc RC injectors 23) Aeromotive Pro series fuel pump good for 120psi 24) Aeromotive regulator 25) 4 gallon Fuel cell 26) Tial Lightweight Exhaust Housing 1.00 27) 4202 compressor housing machined for the 45r wheel 28) ETS 4" Exhaust Last edited by guss76; 04-03-2008 at 06:49 PM.

04-03-2008, 06:08 PM	#4 (permalink)
guss76 Moderator - Smoking Aces - Member Join Date: Jul 2007 Location: Cassada Gardens Posts: 2,277 Thanks: 0 Thanked 0 Times in 0 Posts	APC'S DRAG EVO SUPER MOD APC Racing Evo II http://www.youtube.com/watch?v=I_YO2...eature=related http://www.youtube.com/watch?v=OXIuJ...eature=related Class: Super Mod Best Et: 8.76 Best Mph: 173.68 Horsepower @ Wheels: 915.4 PPG 4speed drag gearbox (special for APC) Custom clutch system Billet center diff Custom made transfer case Chrome molly yoke & driveshaft with 9" uni's Billet front axles with large spline CV's Custom front half shaft with heavy duty bearing Five stud custom front hubs with large wheel bearing Modified factory front callipers with Endless pads Coil over front suspension with adjustable bearing plates Manual steering conversion Super-pro bushes 4 link rear end with A-arm and adjustable sway bar Strange double adjustable coil over shocks with Eibach springs Custom Hilux diff with Evo brake conversion Specially built diff center with custom ratio's Line lock kit Weld pro-star wheels 15 x 8 with 26" slicks (set of 4) Weld pro-star 15 x 10 with 26" slicks for rear (pair) Motec M880 with logging, Lambda & functions Motec CDI 4 Bosch coil x 4 AIM race backlit dash Motec shift light Wiring harness Driveshaft speed sensor High quality sensor fitted throughout Motorsport systems strain gauge for clutch shifting 8 x Bosch motor sport injectors Twin fuel rails Odyssey battery Kinsler fuel regulator & mechanical pump 2 x Magnafuel filters ARE custom fuel cell Braided hose and speed flow throughout 1 x ARE oil catch tank and 1 x rear oil catch tank Custom ARE radiator and header tank ARE liquid intercooler system APC custom inlet manifold CES exhaust manifold HKS 60mm wastegate Garrett GT custom spec turbo CES turbo & wastegate discharge pipe APC custom engine 915HP @ all wheels Full bodied car with lightweight lift off front end Chrome molly roll full cage Rear aerofoil adjustable wing Lexan windows Window net Under body tray Tin-work with 4 link access, wheel tubs Deist chute and harness Race seat and cover Custom sheet alloy dash Last edited by guss76; 04-04-2008 at 12:39 PM.

04-03-2008, 06:16 PM	#6 (permalink)
guss76 Moderator - Smoking Aces - Member Join Date: Jul 2007 Location: Cassada Gardens Posts: 2,277 Thanks: 0 Thanked 0 Times in 0 Posts	Buschur Evo 8 RS Drag Car he EVO is equipped with the following: BR Stage 3 2.0 Shortblock BR Stage 3 Cylinder Head Bushwacker Transmission BR minibattery kit BR coil on plug ignition BR Race FMIC (w/ 3" inlet and outlets) BR custom fuel cell BR Fuel pressure regulator kit (4) RC 1600cc injectors Buschur Racing fuel rail Apexi N1 Coil-over suspension Robi Spec alignment Hoosier Slicks BR 3.5" custom side exit exhaust Kansai intake manifold STOCK front axles, STOCK rear end, STOCK driveshaft, STOCK transfer case Exedy Triple Disc Clutch Driveshaft Shop Stage 5 axles (original design) Weldon Fuel Pump BR BF272 Camshafts BR Small Radiator Kit BR -12 upper and lower radiator hoses BR Custom Built Header GT42R Turbo AEM EMS, w/5 bar map sensor, integral Uego, Air temp sensor Reese Chassis rollcage & chassis work BR Built, Percy Lexan Windows BR Custom Upper and Lower 3" Intercooler Pipes BR Poly Front and Rear Engine Mounts AMS Wilwood Front Brake Kit

04-03-2008, 06:58 PM	#8 (permalink)
cyackle Road Mayhem Join Date: Dec 2007 Location: Antigua Posts: 2,383 Thanks: 4 Thanked 1 Time in 1 Post	me nah understand guss i waiting on the AMS evo lol __________________ A 15031 *Dr. said i got to much Blood in my Rum Stream.*

04-03-2008, 06:44 PM	#7 (permalink)
guss76 Moderator - Smoking Aces - Member Join Date: Jul 2007 Location: Cassada Gardens Posts: 2,277 Thanks: 0 Thanked 0 Times in 0 Posts	1062 WHP 2.0 L Buschur Race Short Block wioth alum rods 9 / 1 compression ratio Buschur Stage II head Gt42 R Shrerer manifold Kansai intake manifold Buschur 3.5" exhuast Buschur race fmic Buschur fmix pipes Buschur cop ignition Buschur mini battery kit Buschur strut bar Buischur MBC Buschur rear mustache bar Shep Trans Drvieshaft shop rear axels AEM EMS 1650 injectors Weldon fuel pump Best 1/4 Mile pass - 9.50 @ 148 Fastest 1/4 mile 156.9

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode