Drag Car

[grainas22]

We can all agree that almost everyone here are huge race fans but don't have the budget to build a race car. If a sponosr gave you "$75K Uncle Sam" what would you build and why. Now it doesn't have to be a dream machine but it's something you want to do and you have the money to do it. Plus we can also use this the share ideas with each other.

To start it off I would go with a 1st generation Eclipse GSX 1991-1994. GT35R Kit
2.3L stroker Kit
AEM Engine management system
A complete John Speppard Drivetrain
800cc Injectors
Forced Performance 321 stainless header
JE Pistons
TiAL Blow Off Valve
Eagle Rods
Some mickey Thompson Slicks
Etc......
Don't really have the time to list every part but it's a start.

[guss76]

Do I get to choose the car then have the 75K to spend ?????

[Kodie]

Do I get to choose the car then have the 75K to spend ?????

Please do note that the $75K is U.S. Dollars, lol!!!

[Mac]

Please do note that the $75K is U.S. Dollars, lol!!!


if i was me 75K us i would do a simple honda build

92-95 civic hatch back cost max
Sleeved k24 bottom end/....
port and polish
k20- type-r head -- m
not certain what low compression pistons.. will update
Turbo set up with T3 turbo
Some slicks


thats just basic. but with that amount you can do alot
and a good ass Suspension..

[Kodie]

if i was me 75K us i would do a simple honda build

92-95 civic hatch back cost max
Sleeved k24 bottom end/....
port and polish
k20- type-r head -- m
not certain what low compression pistons.. will update
Turbo set up with T3 turbo
Some slicks
and a good ass Suspension..

Your turbo is too small, lol!!! And get joke, you wouldn't have to trouble the bottom end at all yet...unless you running at least 35psi or something and a stock block kicks out at 43 psi (it is rumoured) oh and on youtube too, lol!!!

[Mac]

Your turbo is too small, lol!!! And get joke, you wouldn't have to trouble the bottom end at all yet...unless you running at least 35psi or something and a stock block kicks out at 43 psi (it is rumoured) oh and on youtube too, lol!!!



humm.. even better.. banking more money

[damussi]

me will take the money and buy michael R32 skyline from he and save alot of trouble lol

[Michael]

me will take the money and buy michael R32 skyline from he and save alot of trouble lol



Thats not enough money. :eek:

[Teamdiesel]

Thats not enough money. :eek:

LoL, ha ha ha:D

[Kris]

lol hahahahha

[Michael]

Mussi ah try rob me. :D

[damussi]

me will theif um then

[Michael]

Try nuh. :mad:

[Mac]

Try nuh. :mad:

if it go missing u know who to go seee!! lol

[damussi]

well me a tell u early me gone for um up by motomax next me go theif the rest parts from ur home

[Kodie]

humm.. even better.. banking more money

I would use the money and buy the car, because for $75,000 U.S. Dollars i am buying the car....lets work it out $200,250.00 E.C. at a rate of $2.67 when multiplied by $75,000 U.S. then i am buying the car 33.3 times, lol!!!

The car of my choice would be a:

'94 Toyota Tercel - (1500LM spec)

3SGTE Engine Swap

As this is already a low 13sec pass for the tercel with no mods but slicks on regular clutch and pressure plate then i am almost on my way.


BRAKING & SUSPENSION

Wilwood big brake kit
Steel braided brake lines
4 disc brake swap from the GT Starlet
Tein complete N1 suspension for the GT Starlet
Custom Anti-sway bars (front)
Custom 8 point roll cage
Cusco Strut tower bar (front)
Cusco Strut tower bar (rear)
Custom Energy Suspension Bushings (all around)


Exterior

Custom Painted Yaris Gunmetal
Buddy Club Wheel Studs
4x100 SSR Type C-RS 17" wheels (powder coated Bronze)
17x225 Yokohama AVS ES100
CF Trunk
CF Hood
CF Side Mirrors

INTERIOR

Bride Reclineable Bucket seats
TRD Steering wheel & Adapter
Momo Shift Knob
Momo Pedals
TRD floor mats
Microtech LT-10
Blitz Guages
Blitz Timer
Custom CF Dash Kit
Pioneer Fold Out DVD Head Unit
Venom Smart System Nitrous Kit

DRIVETRAIN

(Unlisted) Gearbox
Exedy Twin Plate Clutch/ Heavy Duty Pressure Plate & Lightweight Flywheel
Drive Shaft Shop Stage 5 Axles

ENGINE

keeping it a bit simple due to the heavy tire spinning it will encounter...

HKS GT35R
HKS 44mm External Wastegate
HKS Blow-off Valve
HKS Custom Intercooler Piping
HKS Front Mount Intercooler
HKS 1,000cc Injectors
HKS Oil Catch Can
Custom Fuel Rail
Custom Fuel Lines
Walbro 255 Intank Fuel Pump
Infiniti Q45 Custom Intake Manifold
Custom Air Induct to turbo

Not sure whose parts i'll use in the blocka nd the head yet. But so far thats my dream list and car and i know i have the power to run 10's daily driven!!!

[Michael]

if it go missing u know who to go seee!! lol



Thats the problem. Unless its high day we can't see him. :D

[damussi]

lol lol lol u ****

[Tenchi]

It would be if it can fit a japanese fairlady Z33 (350Z) with

an RB26DETT stroked to 2.7 or
an SR20DET stroked to 2.2

not sure what brand 6 Speed close ratio gear set i would use

with a GT3576 not sure of the trim yet.

Microtech LT10S

1600cc injectors

Zeal coilovers

Brembo slotted discs with Wilwood calipers

and that is it off the top of my head and it would be a full street car. I think that should be interesting.

[guss76]

The mods:

Titan Motorsports - 3.4L race engine (full long block)
Full-Race(Hypertune) - Intake Manifold w/105mm TB & Fuel Rail
Full-Race - GT47-88R Turbo T6 turbo kit w/ 5” downpipe & midpipe
Custom - 5” no cat Exhaust system
Tial - Twin 44mm Wastegates red (comes in turbo kit)
Custom - 4" & 3.5" intercooler Aluminum Piping
Tial - Twin 50MM BOV's (red)
SP - 25x12.75x5” thick FMIC W/ 4in Outlet
Motec - M800 Engine Management System w/ acc(tuned by Titan M.)
Fluidyne Radiator (polished)
Titan - Cam Gears
Titan - fuel kit w/1600cc Bosch Injectors w/ Triple Walbro intank pumps w/-10 lines / FPR etc. (however will use full-race TFFR)
HKS - 280 cams in/ex
Tilton - Tripple Disk Clutch
Defi - Gauges (EGT/OP/FP/BST) MOUNTED IN GLOVEBOX
AIM SPORTS - mxl strada gauge - mounted in custom carbon dash(it's a gauge that shows everything just like a race car)

Susupension Wheels:
HKS – Drag Coilovers
VolK Rays - 19x9.5 and 19x11 silver wheels (not sure of style)
Bridgestone - Potenza 265/30/19 Fronts / 315/30/19 Rears
Weld - 15x4 and 15x10 Drag Wheels
Mickey Thompsons - 28x10.5x15 Rears & 26x4x15 Fronts

[Mac]

Thats the problem. Unless its high day we can't see him. :D

lololol lmao loll :D:D:D:D:D:D

[cyackle]

I would buy NISSAN SILVIA K'S

with a nissan skyline rb26dett swap fully built top to bottom, AEM, walbro 255, 18' volks (not sure of style) ETC and a Greddy T88. and obviously all the other goodies full set of DEFI gauges... paint white or black.

sumthing like DIS but with a bigger turbo.:D

http://i23.photobucket.com/albums/b378/draglarry/candy_240/rb26240sx026.jpg

http://i23.photobucket.com/albums/b378/draglarry/candy_240/rb26240sx022.jpg


And then i would buy a FORD GT

Custome intake and turbo'Z

2 G35R twin tial waste gates and BOV. 1000HP+ EASY

and a upgraded ECU(not sure)

PROOF..

http://stage6motorsports.com/car_engine_05.jpg

http://www.stage6motorsports.com/dyno_fordgt_1181.jpg

:cool:

[damussi]

The mods:

Titan Motorsports - 3.4L race engine (full long block)
Full-Race(Hypertune) - Intake Manifold w/105mm TB & Fuel Rail
Full-Race - GT47-88R Turbo T6 turbo kit w/ 5” downpipe & midpipe
Custom - 5” no cat Exhaust system
Tial - Twin 44mm Wastegates red (comes in turbo kit)
Custom - 4" & 3.5" intercooler Aluminum Piping
Tial - Twin 50MM BOV's (red)
SP - 6” thick FMIC W/ 4in Outlet
Motec - M800 Engine Management System w/ acc(tuned by Titan M.)
Fluidyne Radiator (polished)
Titan - Cam Gears
Titan - fuel kit w/1600cc Bosch Injectors w/ Triple Walbro intank pumps w/-10 lines / FPR etc. (however will use full-race TFFR)
HKS - 280 cams in/ex
Tilton - Tripple Disk Clutch

Susupension Wheels:
HKS – Drag Coilovers
Volf Rays - 19x9.5 and 19x11 silver wheels (not sure of style)
Bridgestone - Potenza 265/30/19 Fronts / 315/30/19 Rears
Weld - 15x4 and 15x10 Drag Wheels
Mickey Thompsons - 28x10.5x15 Front & 26x4x15 Rears

guss remember the man say are have wan budget mine u nah go over it

[guss76]

guss remember the man say are have wan budget mine u nah go over itLOL as long as I don't have to buy the car out of the 75K it is ok on the parts prices

[Michael]

The mods:

Titan Motorsports - 3.4L race engine (full long block)
Full-Race(Hypertune) - Intake Manifold w/105mm TB & Fuel Rail
Full-Race - GT47-88R Turbo T6 turbo kit w/ 5” downpipe & midpipe
Custom - 5” no cat Exhaust system
Tial - Twin 44mm Wastegates red (comes in turbo kit)
Custom - 4" & 3.5" intercooler Aluminum Piping
Tial - Twin 50MM BOV's (red)
SP - 6” thick FMIC W/ 4in Outlet
Motec - M800 Engine Management System w/ acc(tuned by Titan M.)
Fluidyne Radiator (polished)
Titan - Cam Gears
Titan - fuel kit w/1600cc Bosch Injectors w/ Triple Walbro intank pumps w/-10 lines / FPR etc. (however will use full-race TFFR)
HKS - 280 cams in/ex
Tilton - Tripple Disk Clutch

Susupension Wheels:
HKS – Drag Coilovers
Volf Rays - 19x9.5 and 19x11 silver wheels (not sure of style)
Bridgestone - Potenza 265/30/19 Fronts / 315/30/19 Rears
Weld - 15x4 and 15x10 Drag Wheels
Mickey Thompsons - 28x10.5x15 Front & 26x4x15 Rears



I thought it was a Drag Car. :cool:

[guss76]

I thought it was a Drag Car. :cool:So I drag it then put on my AC then drive it home. It's the greatest of both worlds. So this is my drag car ok. 8's here I come :D

[Kodie]

You know am watching everybodys list and the Silvia exhausted that money, Guss's set-up might just left sweet biscuits change in his pocket and am looking at my little set-up and i will be running 10's with that little set-up easily and have $55,000 dollars in change and have a show piece of a car, lol!!!

[Stay Tuned...]

Sentra with 3.5L Maxima VQ35 motor swap...
-Motor Stroked to 3.8L Brian Crower-good guy
-Head ported and polished by Vinny Ten-good guy best at building that motor
Cams-Brian crower
-GT40R Turbo + kit
-Huge Weldon fuel Pump
-1000cc inj
-Motec M800
-Motec CDI

the rest would be roll cage, suspension, brembo brakes, wheels and tires

i would want to be different and underestimated....hehe

who wouldn't race a little old sentra for big money?

[grainas22]

I realised no one even too a shot a getting a V8 in a lawnmower or a GSXR1000 in a Smart Car.

I know one thing, in the yr 2030 Kodie will have the fastest Tercel that run a newer form of Hydrogen. :D

[cyackle]

I thought it was a Drag Car. :cool:








.lolooolloll(we dont have to describe a drag car again do we):Dbut i must change my selection then cause i have too street cars:rolleyes:

[Michael]

I realised no one even too a shot a getting a V8 in a lawnmower or a GSXR1000 in a Smart Car.

I know one thing, in the yr 2030 Kodie will have the fastest Tercel that run a newer form of Hydrogen. :D



Bloop. lol lol lol

[Kodie]

I realised no one even too a shot a getting a V8 in a lawnmower or a GSXR1000 in a Smart Car.

I know one thing, in the yr 2030 Kodie will have the fastest Tercel that run a newer form of Hydrogen. :D

i am still a kid so 2030 is not far off, lol!!

[Wraith]

best of all.

Old model mustang (anyone will do)
Full cage
back half chassie
4link rear with built 9"
514ci big block ford or 560ci chevy
and still have change left over

8sec 1/4 mile everyday and could still drive home.

Am not knocking any other engine but a v8 will run circles around any other engine when it comes to reliability going 9sec and faster 1/4mile.

Until you actually check how much it cost to buy a Titan 3.4 long block or a built RB26 with corresponding turbo's, fuel system etc, etc. and availability of parts in the carribbean you would know v8's would always rule.

The one guy who was building a full street / strip supra in St.Lucia nearly died when he got the quote from Titan to build a 1000hp engine, he is now going V8.

I know what i said is going to stroke the fires of this post but thats what it is all about.

[Michael]

best of all.

Old model mustang (anyone will do)
Full cage
back half chassie
4link rear with built 9"
514ci big block ford or 560ci chevy
and still have change left over

8sec 1/4 mile everyday and could still drive home.

Am not knocking any other engine but a v8 will run circles around any other engine when it comes to reliability going 9sec and faster 1/4mile.

Until you actually check how much it cost to buy a Titan 3.4 long block or a built RB26 with corresponding turbo's, fuel system etc, etc. and availability of parts in the carribbean you would know v8's would always rule.

The one guy who was building a full street / strip supra in St.Lucia nearly died when he got the quote from Titan to build a 1000hp engine, he is now going V8.

I know what i said is going to stroke the fires of this post but thats what it is all about.



Trust me, I know.

[Stay Tuned...]

best of all.

Old model mustang (anyone will do)
Full cage
back half chassie
4link rear with built 9"
514ci big block ford or 560ci chevy
and still have change left over

8sec 1/4 mile everyday and could still drive home.

Am not knocking any other engine but a v8 will run circles around any other engine when it comes to reliability going 9sec and faster 1/4mile.

Until you actually check how much it cost to buy a Titan 3.4 long block or a built RB26 with corresponding turbo's, fuel system etc, etc. and availability of parts in the carribbean you would know v8's would always rule.

The one guy who was building a full street / strip supra in St.Lucia nearly died when he got the quote from Titan to build a 1000hp engine, he is now going V8.

I know what i said is going to stroke the fires of this post but thats what it is all about.

Hahahahaha Nero and then boys at Titan don't play. Supra require big buck to go fast..trust me i know. i seen customers spend $60K easy and still far from 'drag' car. Stuff adds up so fast...especially the little things like fittings, hoses, clamps, piping, labor, etc

[grainas22]

best of all.

Old model mustang (anyone will do)
Full cage
back half chassie
4link rear with built 9"
514ci big block ford or 560ci chevy
and still have change left over

8sec 1/4 mile everyday and could still drive home.

Am not knocking any other engine but a v8 will run circles around any other engine when it comes to reliability going 9sec and faster 1/4mile.

Until you actually check how much it cost to buy a Titan 3.4 long block or a built RB26 with corresponding turbo's, fuel system etc, etc. and availability of parts in the carribbean you would know v8's would always rule.

The one guy who was building a full street / strip supra in St.Lucia nearly died when he got the quote from Titan to build a 1000hp engine, he is now going V8.

I know what i said is going to stroke the fires of this post but thats what it is all about.


Yea man......I was waiting for this type of post but i guess we can have an American Muscle Vs. Import argument antoher time. I think most of us watch PINKS and see how reliable and consistant the V8's are.

[Michael]

Yea man......I was waiting for this type of post but i guess we can have an American Muscle Vs. Import argument antoher time. I think most of us watch PINKS and see how reliable and consistant the V8's are.



That is so true. But at the end of the day it comes down to your personal preference.

Like we had an argument one day where a guy said to me, "Why spend so much money building that car when you can build a Mustang for 1/4 of the money you spending and get more speed and reliability?" My answer: "Duh, because I want to."

:D

[damussi]

well some people spend the money for looks also that y it comes up to so much but i know what ur saying wraith nothing wrong with that but it alls comes down to preference and me will use a supra especially fu bang Michaels skyline

[Michael]

well some people spend the money for looks also that y it comes up to so much but i know what ur saying wraith nothing wrong with that but it alls comes down to preference and me will use a supra especially fu bang Michaels skyline



Which one? The silver one park up outside your house?

[damussi]

shhhhhhhhhhh you go mek everybody know my business

[Michael]

Me sight we go soon end up with that fu race. It go want pull apart soon.

[damussi]

Me sight we go soon end up with that fu race. It go want pull apart soon.

lol lol lol u dun know

[Michael]

Like the orange pink subben :D

[damussi]

Like the orange pink subben :D

thank god that finally gone :D

[Michael]

Wha become of that?

[damussi]

it just dun sell this week so u might see it on the road soon

[guss76]

Wha become of that?I saw it up by factory gas station the other day with a white front bumper, who bought it

[damussi]

I saw it up by factory gas station the other day with a white front bumper, who bought it
y u nah ask the former owner? lol

[Dwight]

I would use the money and buy the car, because for $75,000 U.S. Dollars i am buying the car....lets work it out $200,250.00 E.C. at a rate of $2.67 when multiplied by $75,000 U.S. then i am buying the car 33.3 times, lol!!!

The car of my choice would be a:

'94 Toyota Tercel - (1500LM spec)

3SGTE Engine Swap

As this is already a low 13sec pass for the tercel with no mods but slicks on regular clutch and pressure plate then i am almost on my way.


BRAKING & SUSPENSION

Wilwood big brake kit
Steel braided brake lines
4 disc brake swap from the GT Starlet
Tein complete N1 suspension for the GT Starlet
Custom Anti-sway bars (front)
Custom 8 point roll cage
Cusco Strut tower bar (front)
Cusco Strut tower bar (rear)
Custom Energy Suspension Bushings (all around)


Exterior

Custom Painted Yaris Gunmetal
Buddy Club Wheel Studs
4x100 SSR Type C-RS 17" wheels (powder coated Bronze)
17x225 Yokohama AVS ES100
CF Trunk
CF Hood
CF Side Mirrors

INTERIOR

Bride Reclineable Bucket seats
TRD Steering wheel & Adapter
Momo Shift Knob
Momo Pedals
TRD floor mats
Microtech LT-10
Blitz Guages
Blitz Timer
Custom CF Dash Kit
Pioneer Fold Out DVD Head Unit
Venom Smart System Nitrous Kit

DRIVETRAIN

(Unlisted) Gearbox
Exedy Twin Plate Clutch/ Heavy Duty Pressure Plate & Lightweight Flywheel
Drive Shaft Shop Stage 5 Axles

ENGINE

keeping it a bit simple due to the heavy tire spinning it will encounter...

HKS GT35R
HKS 44mm External Wastegate
HKS Blow-off Valve
HKS Custom Intercooler Piping
HKS Front Mount Intercooler
HKS 1,000cc Injectors
HKS Oil Catch Can
Custom Fuel Rail
Custom Fuel Lines
Walbro 255 Intank Fuel Pump
Infiniti Q45 Custom Intake Manifold
Custom Air Induct to turbo

Not sure whose parts i'll use in the blocka nd the head yet. But so far thats my dream list and car and i know i have the power to run 10's daily driven!!!

Is now I see this...lol
What!!!! :eek::eek: Kodie.....no Pro Streets???? them no good enough for your dream car now???

[Michael]

Is now I see this...lol
What!!!! :eek::eek: Kodie.....no Pro Streets???? them no good enough for your dream car now???



lol lol lol. I didn't even notice that. :eek:

[damussi]

boy what a sell out lol

[Slydell]

LOL LOL that is if he had any intention of putting them on his car