1) Stock Crank
2) Groden Aluminum Rods
3) JE 10.1 Pistons
4) Stock Block Stock Bore size. we felt we needed the extra wall thickness
5) Cooper O-ring on the block with stock head gasket and no receiver grove on the head
6) AMS Head Studs tq to 100ft lbs
7) Stock oil pump
8) GSC CNC Head plus 1 valves,Kiggley Single springs,GSC S3 Cams, and some other good stuff
9) Amsoil 20-50wt oil
10) Modified Oils pick and pan
11) AMS Drag Intake Manifold with Q45
12) ETS 45r Turbo Kit made to work with stock radiator
13) PWR Radiator
14) AEM Cam gears set to zero ( haven't messed with them yet)
15) ETS 3" uicp and licp with Tial 50mm Blow-off Valve
16) ETS Water to Air Intercooler
17) SparkTEch Ignition System with M&W ProDrag4 box and 300m coils
18) Fluidamper
19) AEM EMS
20) All new wiring in the car Painless Wiring Systems
21) AMS Lower light weight cross member
22) 1600cc RC injectors
23) Aeromotive Pro series fuel pump good for 120psi
24) Aeromotive regulator
25) 4 gallon Fuel cell
26) Tial Lightweight Exhaust Housing 1.00
27) 4202 compressor housing machined for the 45r wheel
28) ETS 4" Exhaust
